NW-WM1A/WM1Z
10
10. Open the WALKMAN storage. Check disappear copied “opt3”
folder in step 4 and the “_opt3” folder has been created.
Note 5:
If the “_opt3” folder does not created, start over from step 1.
Under root directory of
WALKMAN storage
“_opt3” folder
has been created
“opt3” folder has
disappeared
11. Disconnect the WALKMAN main unit from PC (personal
computer).
USB cable
12. The menu of the WALKMAN main unit to operate in the fol-
lowing order, and restore the WALKMAN main unit to the fac-
tory con
fi
guration state.
[
]
t
[Settings]
t
[Device Settings] of “Basic Settings”
t
[Reset/Format]
t
[Restore to Factory Con
fi
guration]
t
[Yes]
t
[Yes]
13. The WALKMAN is rebooting.
14. After the WALKMAN is rebooted, language/date/time of ini-
tial setup wizard to complete, and connect the WALKMAN
main unit to PC (personal computer) by the USB cable (WM-
PORT).
USB cable
15. On PC (personal computer), open the WALKMAN storage.
Folders and contents that has been surrounded by a dotted line
frame of the following to check that the presence.
Under root directory of
WALKMAN storage
In the MUSIC folder
(Except CH)
In the MUSIC folder
(CH)
16. Disconnect the WALKMAN main unit from PC (personal
computer).
USB cable
All the setting/check is complete.
