NW-WM1A/WM1Z
38
5-2-6. CH separation (R-ch) check (Separation-R check)
It can be output the “Sampling rate: 44.1 kHz/Frequency: 1 kHz
(R-ch)/Bit rate: 16 bit” audio signal for the separation (R-ch)
check.
Procedure:
1. Enter the test mode.
(Refer to “2. SETTING THE TEST MODE” on page 33)
2. Press the [+]/[–] keys to select the “Audio”, and press the [
u
]
or [
>
] key to enter the minor item.
3. Press the [+]/[–] keys to select the “Separation-R check”.
4. Press the [
u
] key, the audio signal output screen is displayed.
Ch separation (R)
(AUD SEPR command)
sampling
bit rate
freq(R)
freq(L)
play time
output
volume
[ 44100]
[16]
[ 1000]
[ 0]
[10]
[HeadPhone]
[ 90]
Screen display
The format of the
audio signal output
Item of key input settings
5. Press the [
u
] key, and output an audio signal using the set-
tings selected.
6. Slide the [HOLD] switch in the direction of on, to return to
minor item selection screen.
5-2-7. Maximum output check (Max output check)
It can be output the “Sampling rate: 44.1 kHz/Frequency: 1 kHz
(L/R-ch)/Bit rate: 16 bit/Volume: 120” audio signal for the maxi-
mum output check.
Procedure:
1. Enter the test mode.
(Refer to “2. SETTING THE TEST MODE” on page 33)
2. Press the [+]/[–] keys to select the “Audio”, and press the [
u
]
or [
>
] key to enter the minor item.
3. Press the [+]/[–] keys to select the “Max output check”.
4. Press the [
u
] key, the audio signal output screen is displayed.
Audio output (max)
(AUD MAXO command)
sampling
bit rate
freq(R)
freq(L)
play time
output
volume
[ 44100]
[16]
[ 1000]
[ 1000]
[10]
[HeadPhone]
[120]
Screen display
The format of the
audio signal output
Item of key input settings
5. Press the [
u
] key, and output an audio signal using the set-
tings selected.
Note:
This test item can not change the volume. It has been
fi
xed at the
maximum value (120).
6. Slide the [HOLD] switch in the direction of on, to return to
minor item selection screen.
5-2-8. Normalizer check (Normalizer)
It can be output the “Sampling rate: 44.1 kHz/Frequency: 1 kHz
(L/R-ch)/Bit rate: 16 bit” audio signal for the normalizer check.
Procedure:
1. Enter the test mode.
(Refer to “2. SETTING THE TEST MODE” on page 33)
2. Press the [+]/[–] keys to select the “Audio”, and press the [
u
]
or [
>
] key to enter the minor item.
3. Press the [+]/[–] keys to select the “Normalizer”.
4. Press the [
u
] key, the audio signal output screen is displayed.
Audio normalizer
(AUD NMLR command)
sampling
bit rate
freq(R)
freq(L)
play time
output
volume
[ 44100]
[16]
[ 1000]
[ 1000]
[10]
[HeadPhone]
[ 90]
Screen display
The format of the
audio signal output
Item of key input settings
5. Press the [
u
] key, and output an audio signal using the set-
tings selected.
6. Slide the [HOLD] switch in the direction of on, to return to
minor item selection screen.
5-2-9. Sound pressure regulation level check
(Sound
pressure)
It can be output the “Sampling rate: 44.1 kHz/Frequency: 1 kHz
(L/R-ch)/Bit rate: 16 bit” audio signal for the sound pressure regu-
lation level check.
Procedure:
1. Enter the test mode.
(Refer to “2. SETTING THE TEST MODE” on page 33)
2. Press the [+]/[–] keys to select the “Audio”, and press the [
u
]
or [
>
] key to enter the minor item.
3. Press the [+]/[–] keys to select the “Sound pressure”.
4. Press the [
u
] key, the audio signal output screen is displayed.
Sound pressure check
(AUD SPCK command)
sampling
bit rate
freq(R)
freq(L)
play time
output
volume
[ 44100]
[16]
[ 1000]
[ 1000]
[10]
[HeadPhone]
[ 90]
Screen display
The format of the
audio signal output
Item of key input settings
5. Press the [
u
] key, and output an audio signal using the set-
tings selected.
6. Slide the [HOLD] switch in the direction of on, to return to
minor item selection screen.
