Sony VPLL-CT10, Service Manual, Page: 46 / 196

1-38
VPL-PS10/PX10/PX15
26
(GB)
Operations from a Computer
About the window displayed while the
Image Viewer is running
The same window as that in “About the window
displayed while the Image Viewer is running” on page
24 appears.
The NEXT button on the .SHO file select window is to
advance to the next slide immediately during the slide
show. The PREVIOUS button is to go back to the
previous slide.
Using File Manager
You can manage the files stored in the projector from a
computer by a simple operation. The File Manager
function enables you to delete unnecessary files stored
in the projector or to add files stored in a computer to
the projector’s storage.
Use File Manager while checking the currently used
memory and largest unused memory of the projector
displayed in the File Manager window.
Adding files to the projector using File
Manager
1
Click the FILE MANAGER icon in the
Application Select window.
The File Manager window appears.
2
Search for the file stored in a computer you want to
add to the projector.
Click the Browse... button in the Add File section
to open the file select window on the computer.
Select the file you want. You can also select the
file by entering the file name in the Browse... text
box.
You can set the password for the selected file in
this step. Specify the password in the “password”
text box. Setting the password disables you to open
the file from now on unless you enter the
password.
3
Click the Add button.
The selected file is stored in the projector.
Deleting files from the projector using File
Manager
1
Click the FILE MANAGER icon in the
Application Select window.
The File Manager window appears and the list of
files stored in the projector pops up.
2
Select the file you want to delete.
You can check all the files you want to delete.
3
Click the Delete button.
All the files you have checked are removed from
the file list.
Note
You can delete a file even if the password is set for
the file.
27
(GB)
Controlling the Projector from a
Computer
You can perform various adjustments and settings of
the projector on a computer’s display. Three control
windows are available; GENERAL, PICTURE CTRL
and SETTINGS windows, each with different
functions.
The functions of the buttons in the windows are the
same as those on the Remote Commander supplied
with the projector.
For details on the buttons, see the Operating Instructions of
the projector.
The illustrations shown in the steps below are for the
VPL-PX15.
1
Click the MORE... button in the PJ CONTROL
section.
The GENERAL window appears.
2
Click the function tab to select the window you
want.
GENERAL window
x For VPL-FE110U/M
Specify the switcher number with the SWITCHER
button. Use the GROUP button to specify the
group index numbers and the INDEX button to
specify the device index numbers. Click
to open
the drop-down list, then select the number.
PICTURE CTRL window
x
For VPL-PX15
The COLOR TEMP (HIGH, LOW) buttons
function the same as the settings in the menu.
x For VPL-FX50
The DDE (OFF, PROGRESSIVE, FILM) and RGB
EN/– buttons function the same as the
settings in the menus.
For details, see the Operating Instructions of the
projector.
(VPL-PX15)
(VPL-PX15)
(continued)