Sony VPLL-CT10, Service Manual

Page: 19 / 196

1-11
VPL-PS10/PX10/PX15
20
(GB)
Connecting to a VCR or 15k RGB/
Component Equipment
This section describes how to connect the projector to
a VCR or 15k RGB/component equipment.
For more information, refer to the instruction manuals
of the equipment you are connecting.
To connect a VCR
MOUSE
CTRL S
PLUG IN POWER
AUDIO
AUDIO VIDEO S VIDEO
INPUT A ~AC IN
S-Video
cable (not
supplied)
Left side
to audio
output
Video
cable (not
supplied)
VCR
to S video
output
to video
output
.........................................................................................................................................................................................................
1) Macintosh is a registered trademark of Apple Computer, Inc.
Connecting the Projector
When you use a PS/2 mouse port
MOUSE
CTRL S
PLUG IN POWER
AUDIO
AUDIO VIDEO S VIDEO
INPUT A ~AC IN
Stereo
audio
connecting
cable (not
supplied)
Left side
HD D-sub 15-pin
cable (supplied)
PS/2
Mouse
cable
(supplied)
to monitor
output to mouse
port (PS/2) to audio
output
To connect a Macintosh
1)
computer
Use an ADP-20 signal adapter (not supplied). In this
case, however, you cannot control the mouse of the
computer using the Remote Commander.
Computer
Stereo
audio
connecting
cable (not
supplied)
21
(GB)
To connect 15k RGB/Component
equipment
Notes
• Set the aspect ratio using ASPECT in the INPUT
SETTING menu according to the input signal.
For details, see page 30 (GB).
• When you connect the projector to 15k RGB/
component video equipment, select RGB,
component or VCR GBR with the INPUT-A setting
in the SET SETTING menu.
• Use the composite sync signal when you input the
external sync signal from 15k RGB/component
equipment.
MOUSE
CTRL S
PLUG IN POWER
AUDIO
AUDIO VIDEO S VIDEO
INPUT A ~AC IN
SMF-402 Signal Cable (not
supplied) HD D-sub 15-pin
(male)
y 3
×
phono jack
Left side
to audio
output
Stereo
audio
connecting
cable (not
supplied)
15k RGB/Component
equipment
to RGB/
component
output
PUSH
Connecting to a LAN (VPL-PX15
only)
This projector is networking compatible. Using a
wireless LAN PC card or a 10BASE-T/100BASE-TX
LAN cable, you can connect the projector to a
wireless or wired LAN. You can also install a PC
memory card.
This section describes how to connect to a LAN and
how to install a PC card.
Whenever you connect the projector to a LAN or use
a memory card, set INPUT-B FUNC. in the
INSTALL SETTING menu to ON.
For details, see page 33 (GB).
Installing a PC card
When you use a wireless LAN PC card or memory
card, insert the card into the INPUT B PC CARD
slot.
To remove the PC card from the slot, press the eject
button.
PC card
Insert the card with the arrow mark
facing toward the slot.
The eject button pops out
when the card is inserted.
Connecting the Projector