Sony VID-P110, Service Manual

Page: 24 / 82

2-8 (E) VID-P110
2-2-9. Removal of PS-526 Board/AC Inlet/AC
Outlet (UC model only)
1. Remove the cover ass’y. (Refer to section 2-1-1.)
2. Remove the rear panel block. (Refer to section 2-1-2.)
3. Remove two screws (B3 x 6).
4. Unsolder AC outlet (UC model only) and AC inlet on
PS-526 board.
5. Remove one screw (PWH3 x 6) and then remove
PS-526 board.
6. Unlock two claws (left/right) and then unlock four
claws (upper/lower).
And remove AC outlet in the direction of arrow.
2-2-10. Removal of VSW-60 Board
1. Remove the cover ass’y. (Refer to section 2-1-1.)
2. Remove the rear panel block. (Refer to section 2-1-2.)
3. Remove eight screws (BVTP3 x 8).
4. Remove four screws (PWH3 x 6) and then remove
VSW-60 board.
screw
(B3
x 6)
screw
(PWH3
x 6)
PS-526
board
AC inlet
AC outlet (for UC)
claw (upper)
claw (lower)
claw (left)
claw (right)
AC outlet
screw
(PWH3
x 6)
screw
(PWH3
x 6)
screw
(BVTP3
x 8)
screw
(BVTP3
x 8)
screw
(BVTP3
x 8)
VSW-60 board