Sony VID-P110, Service Manual

Page: 25 / 82

2-9 (E) VID-P110
2-2-11. Removal of Lampshade B
1. Remove one screw (PTP2.6
x
8).
2. Slide lampshade B in the direction of arrow B while
releasing two claws.
2-2-12. Removal of Lamshade A
1. Remove the cover ass’y. (Refer to section 2-1-1.)
2. Remove the table ass’y. (Refer to section 2-1-2.)
3. Remove the lampshade B. (Refer to section 2-2-11.)
4. Disconnect one connector (CN6) on PS-517 board and
pull out two contacts from the connector housing.
5. Disconnect fluorescent lamp from the socket.
6. Remove two screws “a” (PTP2.6 x 6) and remove lamp
holder and reflection plate.
7. Remove two screws “b” (PTP3
x
10) and then remove
socket fixing plate.
8. Pull out the socket.
9. Remove the nut, wave washer, polyslider washer and
friction plate, then remove lampshade A.
screw
(PTP2.6
x 8)
Lampshade B
claw
Lampshade A
Lampshade C
screw "b"
(PTP3
x 10)
screw "a"
(PTP2.6
x 6)
screw "a"
(PTP2.6
x 6)
Lampshade C
Lampshade A
Lampshade
connecting plate
Friction plate
Socket
fixing plate
Contact
Plyslider
washer
Wave
washer
Fluorescent lamp
Lamp holder
Reflection plate Nut
Socket