2-2 (E)
VID-P110
2-1-2. Removal of Table Ass’y and Rear Panel Block
Table Ass’y
1. Remove the cover ass’y. (Refer to section 2-1-1.)
2. Remove seven screws “a” (PTP4
x
12) and two screws
“b” (PTP3
x
10).
3. Move light ass’y L/R and arm to the position in figure.
4. Remove table ass’y in the direction of arrow.
screw "a"
(PTP4
x
12)
screw "a"
(PTP4
x
12)
screw "b"
(PTP3
x
10)
screw "c"
(B3
x
10)
screw "d"
(B3
x
6)
screw "c"
(B3
x
10)
hexagonal
screw
CN3
CN2
CN1
CN3
CN501
PS-526
board
VSW-60
board
Table ass'y
Rear panel
block
Arm
Light ass'y L
Light ass'y R
Rear Panel Block
1. Remove the cover ass’y. (Refer to section 2-1-1.)
2. Disconnect four connectors (CN1, CN2, CN3, CN501)
on VSW-60 board and one connector (CN3) on PS-526
board.
3. Remove two screws “c” (B3
x
10), one screw “d”
(B3
x
6) and two hexagonal screws and then remove
rear panel block.
Summary of Contents for VID-P110
