Installing an additional hard disk drive
1.
Shut down your computer and turn off all peripheral devices, such as your printer.
2.
Unplug your computer and any peripheral devices.
3.
Gently place the unit on its side and remove the side panel. See
About Opening the Computer
Certain VAIO
®
computers require you to configure the jumpers on the new drive as a slave. Follow the configuration
instructions supplied with your new hard disk drive.
If your computer has a Serial ATA (SATA) hard disk drive, you do not need to configure the new drive. See your
computer's specifications sheet for details about the installed hard disk drive.
4.
Detach the power and drive cables from the original hard disk drive that is preinstalled in your computer.
5.
Unlock the drive holder from the chassis by lifting the drive holder handle straight out from the unit.
6.
Use the handle to slide the drive holder out.
Rem ov ing the driv e holder
7.
Slide the new drive into the drive holder and align the holes on each side of the drive bay.
8.
Secure the drive to the drive holder with screws, through the holes on each side of the drive holder.
Attaching the driv e screws
Page 199
Summary of Contents for VGC-RA810G
Page 11: ...Page 11 ...
Page 31: ...Page 31 ...
Page 65: ...Logs off from this computer or enables you to switch users Page 65 ...
Page 161: ...Page 161 ...