43
VGF-WA1 3-094-116-11(1)
Oper
ation
7
Press
/
and ENTER to set the
playback content.
If you select [Yes], the currently playing
content is played when turned on by the
On-Timer.
If you select [No], the content that you set
last time is played.
8
Press /- to adjust the
playback volume, and then press
/
and ENTER to set the volume.
If you select [Yes], the current volume is
set when turned on by the On-Timer.
If you select [No], the volume you set last
time remains set.
“Confirm On-Timer settings” appears.
9
Press
/
to select [OK], and then
press ENTER.
The On-Timer is set and appears on
the playback screen.
Three minutes prior to the time you set,
this device prepares for the On-Timer
playback.
Tips
If you do not want to set the Finish Time, set it to
[--:--].
When you are setting the On-Timer in PC
Streaming Function or in Internal Memory
Function, the playback mode changes temporarily
to [1 Repeat]. After completing the setting, it is
restored.
If the specified content has been deleted before the
On-Timer playback starts or if the content cannot
be found, an alarm sounds at the start time. Press
any buttons to stop the alarm.
If the time periods for the timer1 and timer2
overlap, the timer that is set to start earlier
overrides the later one.
Notes
You cannot use the On-Timer function in
Auxiliary Function.
If you fully shut down this device (page 31), the
On-Timer settings are reset.
If this device has already been turned on before
three minutes from the start time of the On-Timer,
the On-timer is not activated.
