VAIO
®
Notebook Quick Start
52
My notebook starts, but my system doesn’t start properly.
❑
When the internal backup battery is low on power, it may not start your
system properly. The message “Press <F1> to resume, <F2> to setup”
appears at the bottom of the screen. Follow these steps:
1
Press F2. The BIOS Setup menu appears.
2
Set the date (month/day/year). Press Enter.
3
Press
to select System Time, then set the time (hour: minute:
second). Press Enter.
4
Press
to select Exit, then press
to select Get Default Values. The
message “Load default configuration now?” appears.
5
Select Yes and press Enter.
6
Select Exit (Save Changes), and then press Enter. The message “Save
Configuration changes and exit now?” appears.
7
Select Yes, then press Enter. The notebook restarts.
My notebook starts, but the message “Operating system not found” appears
and Windows does not start.
❑
Make sure there is no diskette in the floppy disk drive (non-bootable).
❑
If a non-bootable diskette is in the drive, follow these steps:
1
Turn off the notebook, and then remove the diskette.
2
Restart the notebook and confirm that Windows starts properly.
❑
If Windows still does not start, follow the steps below to initialize the BIOS:
1
Remove any diskette from the floppy disk drive.
2
Turn off the notebook.
3
Remove any peripheral devices connected to the notebook.
4
Turn on the notebook.
5
Press the F2 key when the Sony logo appears. The BIOS setup menu
screen appears.
6
Press the directional arrow keys to select the Exit menu.
Summary of Contents for VAIO PCG-SR27
