background image

2

WARNING

To prevent  fire or shock hazard, do not expose the unit 
to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer 
servicing to qualified personnel only.

THIS APPARATUS MUST BE EARTHED.

For the customers in the U.S.A.

This equipment has been tested and found to comply 
with the limits for a Class A digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful 
interference when the equipment is operated in a 
commercial environment. This equipment generates, 
uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instruction 
manual, may cause harmful interference to radio 
communications. Operation of this equipment in a 
residential area is likely to cause harmful interference in 
which case the user will be required to correct the 
interference at his own expense. 

You are cautioned that any changes or modifications not 
expressly approved in this manual could void your 
authority to operate this equipment.

This device requires shielded interface cables to comply 
with FCC emission limits.

For the customers in Canada

This unit has been certified according to Standard CSA 
C22.2 NO.601.1.

Important safeguards/notices for use in 
the medical environments

1 All the equipments connected to this unit shall be 

certified according to Standard IEC60601-1, 
IEC60950, IEC60065 or other IEC/ISO Standards 
applicable to the equipments.

2 When this unit is used together with other equipment 

in the patient area*, the equipment shall be either 
powered by an isolation transformer or connected via 
an additional protective earth terminal to system 
ground unless it is certified according to Standard 
IEC60601-1.
* Patient Area

3 The leakage current could increase when connected 

to other equipment.

4 This equipment generates, uses, and can radiate 

frequency energy. If it is not installed and used in 
accordance with the instruction manual, it may cause 
interference to other equipment. If this unit causes 
interference (which can be determined by unplugging 
the power cord from the unit), try these measures: 
Relocate the unit with respect to the susceptible 
equipment. Plug this unit and the susceptible 
equipment into different branch circuit. Consult your 
dealer. (According to Standard EN60601-1-2 and 
CISPR11, Class B, Group 1)

Caution

When you dispose of the unit or accessories, you must 
obey the law in the relative area or country and the 
regulation in the relative hospital.

Warning on power connection

Use a proper power cord for your local power supply.

Warning on power connection for medical use

Please use the following power supply cord.

*Note: Grounding reliability can only be achieved when the equip-
ment is connected to an equivalent receptacle marked ‘Hospital Only’ 
or ‘Hospital Grade’.

Symbol on the products

This symbol indicates the equipotential 
terminal which brings the various parts of 
a system to the same potential.

This symbol is intended to alert the user to 
the presence of important operating and 
maintenance (servicing) instructions in 
the literature accompanying the 
appliance.

United States

Canada

Continental 
Europe

Plug Type

HOSPITAL 
GRADE*

HOSPITAL 
GRADE*

LP-34A

Female end

E62405

LR53182

LS-60

Cord type

E159216
Min.Type SJT
Min.18 AWG

LL112007-1
Min.Type SJT
Min.18AWG

H05VV-F

Minimum cord 
set rating

10A/125V

10A/125V

10A/250V

Safety approval UL Listed

CSA

VDE

R1.5m

Summary of Contents for UP-D895MD















Reviews: