6-2
UP-D70XR
Trouble
Cause
Countermeasure
Paper is stopped at halfway
1 : Ribbon is rolled up.
1 : Replace the take up motor.
of printing.
2 : Ribbon is stuck on.
2 : Replace the SY board.
Paper is stopped at halfway
1 : Color is not registered.
1 : Refer to “Mis-registration color in print”.
of rewinding paper.
2 : Paper is shorter than ordinary paper.
2 : Replace the paper.
3 : Ribbon is stuck on paper
3 : Replace the take up motor.
3 : Replace the supply motor.
3 : Replace the SY board.
4 : Paper is stuck on paper feed guide.
4 : Replace the paper feed guide.
5 : Size sensor defective.
5 : Replace the size sensor.
6 : Setting of letter and A4 size is mistake.
6 : Set the paper size correctly.
When delivering the paper,
1 : Ribbon is stuck on the paper.
1 : Replace the take up motor.
paper is stopped.
1 : Replace the supply motor.
1 : Replace the SY board.
2 : Papers heap at delivery exit.
2 : Remove the paper.
Ribbon is rolled up.
1 : Take up motor defective.
1 : Replace the take up motor.
Improper head contact.
1 : Defective of head attachment.
1 : Head should be attached correctly.
2 : Platen defective.
2 : Replace the platen.
3 : Head drive arm defective.
3 : If the head drive arm is removed, assemble it
correctly.
3 : If the head drive arm is damaged, replace the
drive axis ass’y.
4 : Head guide (S) defective.
4 : Replace the head guide (S).
5 : Heat sink defective.
5 : Replace the heat sink.
Unevenness color in print.
1 : Platen defective.
1 : Replace the platen.
Horizontal toward unevenness
1 : Head defective.
1 : Replace the head.
density in print.
Horizontal line in print.
1 : Dust is attached to the head.
1 : Clean the head with a soft cloth dampened with
ethyl alcohol.
2 : Head defective.
2 : Replace the head.
Vertical line in print.
1 : Ribbon is slipped.
1 : Replace the ribbon.
2 : Pulley or gear defective.
2 : Replace the pulley or gear.
3 : Supply motor defective.
3 : Replace the supply motor.
Mis-registration color in print.
1 : Ribbon tension setting is not correctly.
1 : The tension should be set correctly.
2 : Take up motor defective.
2 : Replace the take up motor.
3 : Supply motor defective.
3 : Replace the supply motor.
4 : Grease of take up side worm gear is short.
4 : Supply the grease.
5 : Paper is sent slantly.
5 : Refer to “Printing paper is sent slantly”.
6 : Edge sensor defective.
6 : Correct the edge sensor attached portion of
paper delivery guide (B).
6 : Replace the paper delivery guide (B).
7 : Rubber of capstan is clogged.
7 : Clean the capstan.
8 : Ribbon defective.
8 : Replace the ribbon.
Frill in print.
1 : Ribbon tension setting is not correctly.
1 : The tension should be correctly.
2 : Ribbon defective.
2 : Replace the ribbon.
Summary of Contents for UP-D70XR
