Sony UP-D70XR, Service Manual

Page: 81 / 96

5-11
UP-D70XR
.
BCD D/A
Ribbon cassette is inserted and it is adjusted by depressing [
→
] key. This adjustment is needed two or
three times repeatly to obtain the most suitable value. In case readjustment is needed, following
indication is appeared, it is adjusted by depressing [
→
] key again.
BCD D/A
SENSOR ERROR
.
RIBBON D/A
Ribbon cassette should be set the position to see only the cyan portion. And cassette is inserted to the
unit. It is adjusted by depressing [
→
] key.
.
OHP D/A
Ensure that paper is not entered in the unit. It is adjusted by depressing [
→
] key.
5-3. FMY Printing
Test pattern printing is also performed in ordinary mode by operating front key only. Color steps is
written in memory by depressing both [STOP] and [MENU] keys simultaneously. After that, print is
performed by depressing PRINT key.
It is different from test pattern in service mode, print is performed through FMY-15 board. But,
adjustment of COLOR ADJUST is not reflected. Be careful, ribbon remaining quantity is changed by
this printing.