manualshive.com logo in svg

Sony STR-ZA810ES, Manual

Share
Download
Sony STR-ZA810ES Manual Download Page 86

[77] Enjoying Video and Sound

Enjoying sound effects

Adjusting the equalizer (Equalizer)

You can use the following parameters to adjust the tonal quality (bass/treble level) of the front,
center, surround/surround back and height speakers.

 Level (dB)

 Frequency (Hz)

 Bass

 Treble

Note

This function does not work in the following cases:

[Pure Direct] is set to [On].
[Bluetooth Mode] is set to [Transmitter].
[DSD Native] is set to [On] and DSD signals are being played back.

Frequencies for [Bass] and [Treble] are fixed.

Depending on the audio format, the receiver may play signals at a lower sampling frequency than the
original sampling frequency of the input signals.

Only [Bass] gain and [Treble] gain are available for [Front] when headphones are connected.

Hint

You can also select [Equalizer] in [Sound Effects] from the home menu. Additionally, you can adjust
the equalizer from the [<EQ>] menu on the display panel by pressing AMP MENU.

setting.

Select [Setup] - [Speaker Settings] from the home menu.

1

Select [Equalizer].

2

Select [Front], [Center], [Surround] or [Height].

3

Select [Bass] or [Treble].

4

Adjust the gain.

5

Summary of Contents for STR-ZA810ES




























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands