manualshive.com logo in svg

Sony STR-ZA810ES, Manual

Share
Download
Sony STR-ZA810ES Manual Download Page 198

[258] Troubleshooting

Tuner

The FM stereo reception is poor.

Perform the following procedure to set the FM station receiving mode to the monaural mode.

Note

You can set FM mode in the options menu if the frequency indication is selected in step 3.

[259] Troubleshooting

Tuner

You cannot tune to radio stations.

Check that the antennas (aerials) are connected securely. Adjust the antennas (aerials) if
necessary.
The signal of the stations is too weak with automatic tuning. Use direct tuning.
No stations have been preset or the preset stations have been cleared (when tuning by
scanning preset stations is used). Preset the stations.
Press DISPLAY MODE on the receiver repeatedly so that the frequency appears on the
display panel.

[260] Troubleshooting

USB devices

Are you using a compatible USB device?

If you connect an incompatible USB device, the following problems may occur.

The USB device is not recognized.
File or folder names are not displayed on this receiver.

Select [Listen] - [FM TUNER] from the home menu.

1

Select a station on the FM band.

2

Press OPTIONS.

3

Select [FM Mode] from the menu.

4

Select [Monaural].

5

Summary of Contents for STR-ZA810ES




























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands