manualshive.com logo in svg

Sony STR-ZA810ES, Manual

Share
Download
Sony STR-ZA810ES Manual Download Page 11

HDR (High Dynamic Range) images cannot be displayed in HDR mode. [239]

Display does not appear on the display panel. [240]

Image does not appear on the TV screen when the receiver is not turned on. [241]

When the language for the on-screen display of the TV is changed, the on-screen
display language of the receiver is changed simultaneously. [242]

Sound

No sound or only a very low level of sound is heard, no matter which device is
selected. [243]

There is severe humming or noise. [244]

No sound or only a very low level of sound is heard from specific speakers. [245]

There is no sound from a specific device. [246]

The left and right sound is unbalanced or reversed. [247]

Dolby Digital or DTS multi-channel sound is not reproduced. [248]

The surround effect cannot be obtained. [249]

A test tone is not output from the speakers. [250]

A test tone is output from a different speaker than the speaker displayed on the TV
screen. [251]

No sound is output from the TV when the receiver is in standby mode. [252]

No TV sound is output from the receiver. [253]

Image and sound are not output from the TV when the receiver is not turned on.
[254]

The sound is output from both the receiver and the TV. [255]

When the Wireless Multi-Room function is active, the sound lags behind the
picture. [256]

Tuner

The FM reception is poor. [257]

The FM stereo reception is poor. [258]

You cannot tune to radio stations. [259]

USB devices

Are you using a compatible USB device? [260]

When the music on the USB device is played back, there is noise, skipping, or
distorted sound. [261]

A USB device is not recognized. [262]

Playback does not start. [263]

A USB device cannot be connected to the USB port. [264]

Erroneous display. [265]

An audio file cannot be played. [266]

Network connection

Summary of Contents for STR-ZA810ES




























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands