manualshive.com logo in svg

Sony STR-ZA810ES, Manual

Share
Download
Sony STR-ZA810ES Manual Download Page 82

You can also select [Sound Field] in the [Audio Settings] menu.

[74] Enjoying Video and Sound

Enjoying sound effects

Selectable sound fields and their effects

Sound field

Display

panel

Effects of the sound field

2CH/MULTI

2ch Stereo

2CH
STEREO

Plays back 2-channel audio signals without
adding any surround effect. Monaural and
multi-channel audio signals are output after
being converted into a 2-channel signal.
This sound field is best suited for playing
back audio signals as they are from two
front speakers only, without adding any
virtual surround effect.
The sound is output from the front left/right
speakers only. There is no sound from the
subwoofer.

Multi Ch Stereo

MULTI ST.

Outputs sound from all connected
speakers.
When 2-channel or monaural audio signals
are input, the receiver outputs sound from
all speakers without adding any surround
effect.
When multi-channel audio signals are
input, sound may not be output from certain
speakers depending on the speaker
settings or playback content.

Direct

DIRECT

Plays back all audio signals without adding
any surround effect.

A.F.D. (Auto
Format
Decoding)

A.F.D.

Decodes and plays back audio signals
using the optimal processing method
according to the audio signal input.

MOVIE

Dolby Surround

DOLBY
SURR

Dolby Surround upmixer expands
traditional audio content for playback
through multi-channel speaker
configuration, including height speakers.
This makes it possible to reproduce height
information for sound images even when
playing back conventional movie or audio
content, providing a more realistic sense of
immersion than ever before.
This upmixer is a new and enhanced
replacement for the Dolby Pro Logic II
technology.

Neural:X is a new upmixer technology

Summary of Contents for STR-ZA810ES




























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands