About “Memory Stick” Media
101
A
ppe
ndix
2
Record.
When you record, the file name display will
stop blinking and display steadily.
“(NEXT)” will change to “G003C008,”
“G003C009,” etc. in sequence.
Note
The camera ID and reel number settings in the “FILE
LIST” of the SYSTEM Setup menu do not change when
the SRMemory card is inserted. The settings change
when recording is performed.
This section describes the file names that are used
when you change the camera ID setting in the
SYSTEM Setup menu.
1
Change the “CAMERA ID” setting to
“F” in the “FILE LIST” of the
SYSTEM Setup menu.
When you change the camera ID setting, the
“REEL NO.” setting will change to “001.”
2
Record.
If the SRMemory card did not contain a file
named “F001XXXX_XXXXXXXX,” the
files will be named in sequence starting with
“F001C001.”
Tip
If you change the settings to the camera ID and reel
number of a file that exists on the SRMemory card,
the file that is recorded next will continue from the
existing information.
For example, if a file named
“F001C005_XXXXXXXX” exists on the
SRMemory card, the name of the file recorded next
will be “F001C006_XXXXXXXX.”
The unit supports the storing and recalling of the
following data on a “Memory Stick.”
Supported “Memory Stick” types
The SR-R4 supports “Memory Stick” media up to
128 MB capacity, and “Memory Stick PRO”
media up to 8 GB capacity.
Note on data read/write speed
Data read/write speed may vary depending on the
combination of the “Memory Stick” and
“Memory Stick”-compliant product you use.
Note
“Memory Stick Duo” media and “Memory Stick PRO
Duo” media cannot be used as is in the SR-R4. In order
to use these “Memory Stick” types, a separately
available “Memory Stick Duo” adapter is required. If a
“Memory Stick Duo” or “Memory Stick PRO Duo” is
forced into the unit without an adapter, it may not be
possible to retrieve the media.
Inserting a “Memory Stick”
Insert the “Memory Stick” into “Memory Stick”
slot on the control panel with the logo side facing
down and the terminal facing up. Push the
“Memory Stick” all the way in.
When the Camera ID is Changed
About “Memory Stick”
Media
Control
Panel
Terminal
Logo side
“Memory Stick”
