– 7 –
Getting Started
16
US
To change the local area code
1
Perform steps 1 to 3 on page 15.
The current local area code appears on the display.
2
Press
(ERASE)
to erase the current local area code.
3
Enter a new local area code using the dialing keys.
4
Press
(PROGRAM)
.
You hear a long confirmation beep.
To erase the local area code
You can erase the local area code. Perform steps 1 and 2 on page 15,
then press
(PROGRAM)
. The local area code will be erased, and you
hear a long confirmation beep.
Step 4: Entering the area code (continued)
Getting Started
17
US
Getting Started
Setting up the phone services
Set up the “Caller ID with call waiting” service and the Long Distance
Saver function before use. Setting up the phone services is only
possible on the base phone.
To set up the “Caller ID with call waiting” service
In order to use this service, you must first subscribe to “Caller ID with
call waiting” service (see page 78). The “Caller ID with call waiting”
service is preset to “ACTIVE”.
1
Press
(PROGRAM)
.
2
Turn Jog Dial to choose “BASE
SETTINGS”, and then press Jog
Button (ENTER).
3
Turn Jog Dial to choose
“PHONE SERVICES”, and then
press Jog Button (ENTER).
4
Press Jog Button (ENTER).
5
Turn Jog Dial to choose
“ACTIVE” or “INACTIVE”, and
then press Jog Button (ENTER).
You hear a long confirmation
beep.
Step 5
(ERASE)
(LONG DIST. SAVER)
Jog Button
(ENTER)
continued
CALL WAITING ID
GO BACK
ACTIVE
INACTIVE
PHONE SERVICES
GO BACK
CALL WAITING ID
LONG DISTANCE
Getting Started
18
US
Note
Do not allow more than 20 seconds to elapse during the operation procedure.
Tip
When you select “[GO BACK]”, you can return to the previous set display by
pressing Jog Button (ENTER).
To set up the Long Distance Saver function
Many telephone companies and service providers nowadays offer low-
rate long distance calls separate from your standard long distance
provider. Such services are usually initiated by dialing an access
number prior to the long distance call itself.
The Long Distance Saver function enables you to dial the access
number of these special long distance service companies by pressing
just
(LONG DIST. SAVER)
. After setting up the access number and
activating the button function in the menu, you only need to press
(LONG DIST. SAVER)
for dialing the access number of your special long
distance carrier.
In order to use this function, you must first activate the button function
by memorizing the access number of your choice in the menu and by
setting the long distance menu function to “ACTIVE”
The long distance menu is preset to “INACTIVE”, no preset access
number is registered.
To set up the access number
1
Perform steps 1 and 3 on page 17.
2
Turn Jog Dial to choose “LONG DISTANCE”, and then
press Jog Button (ENTER).
3
Turn Jog Dial to choose “ACCESS NUMBER”, and then
press Jog Button (ENTER).
4
Enter the access number using the dialing keys.
5
Press
(PROGRAM)
.
6
Turn Jog Dial to choose “YES” to activate
(LONG DIST. SAVER)
, and then press Jog Button (ENTER).
You hear a long confirmation beep.
Step 5: Setting up the phone services (continued)
Getting Started
19
US
Getting Started
Notes
•
DO NOT USE
(LONG DIST. SAVER)
to dial EMERGENCY services, customer
service numbers, your local telephone company, local numbers or toll
free numbers.
• If you press
(LONG DIST. SAVER)
twice, the dialing of the registered access
number is cancelled and “[LONG DISTANCE]” disappears from the display.
• If the access number is not correctly set, “SEND TO CORDLESS HANDSET
FAILED.” will appear on the display and five short error beeps will be heard
after Jog Button (ENTER) is pressed in step 6. Move the cordless handset
closer to the base phone, and then start over the procedure.
• You can register up to 24 digits as an access number.
To change the access number
1
Perform steps 1 and 3 on page 18.
The current access number appears on the display.
2
Press
(ERASE)
to erase the current access number.
3
Enter a new access number using the dialing keys.
4
Press
(PROGRAM)
.
5
Turn Jog Dial to choose “YES” to activate
(LONG DIST. SAVER)
, and then press Jog Button (ENTER).
You hear a long confirmation beep.
To activate/deactivate the Long Distance Saver function
1
Perform steps 1 to 3 on page 17.
2
Turn Jog Dial to choose “LONG DISTANCE”, and then
press Jog Button (ENTER).
3
Turn Jog Dial to choose “ACTIVE” or “INACTIVE”(to
deactivate), and then press Jog Button (ENTER).
You hear a long confirmation beep.
Notes
• If you choose “INACTIVE” in step 3,
(LONG DIST. SAVER)
will be deactivated
and you cannot use
(LONG DIST. SAVER)
even with a registered access
number until the function is activated again.
• Some Long Distance services may not be available in your state. Prices and
conditions may vary. For details, contact your telephone company or your
long distance provider. Some long distance call programs require a
subscription with the carrier company before usage.
• If it is not correctly set in “ACTIVE” or “INACTIVE”, “SEND TO
CORDLESS HANDSET FAILED.” will appear on the display and five short
error beeps will be heard after Jog Button (ENTER) is pressed in step 3. Move
the cordless handset closer to the base phone, and then start over the
procedure.
