Sony SO-02L, Instruction Manual

Page: 223 / 263

221 Appendix/Index
Cannot use the terminal overseas (when
is displayed).
･
Check if you are out of the international
roaming service area or in an area with
poor signal strength.
Check if the service area and network
operator are available or not, refer to NTT
DOCOMO website.
･
Change the network settings or overseas
network operator settings.
- Set "Preferred network type" to "4G
(preferred)/3G/GSM".
→
P.210
- Turn on "Automatically select network".
→
P.209
･
Turning the power off and on may solve
the problem.
→ P.43
Cannot perform data communication
overseas.
･
Turn on "Data roaming".
→
P.209
The terminal suddenly became
unavailable while using overseas.
･ Check if usage amount exceeds the limit
of maximum charges for use.
For use of "International roaming (WORLD
WING)", the limit of maximum charges for
use is set in advance. If the limit of
maximum charges for use is exceeded,
pay the charges.
Cannot receive calls overseas.
･ Is "Restricting incoming calls" set to
"Activate restriction"?
→
P.213
No caller ID is notified/a notified caller ID
is different from that of the caller/
functions for using contents saved in
phonebook or those using Caller ID
notification do not operate.
･ Even if a caller notifies its caller ID, it is not
displayed on the terminal unless the
network or network operator notifies it.
And a different caller ID may be notified
depending on the network or network
operator you use.
■
Data management
Data transfer is not performed.
･ Check if USB hub is used. If you use USB
hub, operations may not be performed
correctly.
Data saved in microSD card is not
displayed.
･
Remove and attach the microSD card.
→
P.34
" "/"
u
" appears when displaying
images or images are not displayed
correctly.
･
When image data is destroyed, " "/"
u
"
may appear or no image may appear.