Sony SO-02L, Instruction Manual

Page: 20 / 263

18 Contents/Precautions
･
It is not abnormal if the terminal
becomes warm while in use and
charging. You can continue using the
terminal.
･
Do not expose the camera lens under
direct sunlight.
If you do so, some of the elements may melt or
become faded.
･
Always keep the cover of docomo nano
UIM card/microSD card slot closed
during use.
Failure to do so may allow liquids such as water
(drinking water, sweat, seawater, urine of pet
animals, etc.) or foreign objects such as dust to
enter inside and cause a malfunction.
･ Do not subject the fingerprint sensor to
strong impact or scratch it.
Doing so not only may cause a malfunction of
the fingerprint sensor, but authentication may
become unavailable.
･
While microSD card is being used, do
not take the card out and do not turn off
the terminal.
Doing so may cause data loss or malfunction.
･
Keep off a magnetic card or a magnetic
object from the terminal.
The data in cash cards, credit cards, etc. may be
erased.
Also, strong magnetic objects may cause a
malfunction of the terminal.
･
Do not decorate the terminal with a film
or stickers.
The functions using the proximity sensor may
not work properly.
For a location of proximity, see the following.
⇒
P.29 "Part names and functions"
･
The internal battery is out of the
warranty due to a consumable part.
The internal battery may become swelled toward
the end of battery life depending on usage
condition of the internal battery.
Replace the internal battery if the usable time is
extremely shortened even in a full charge or
when the internal battery is swollen. For
replacing internal battery, contact "Repairs
(Inquiries/Request)" on the last page (in Japanese
only) or DOCOMO-specified repair office.
･
Charge the battery in an environment
with the proper ambient temperature
(5
℃
to 35
℃
).
･
The operating time of the internal
battery varies depending on the
operating environment and the
degradation level of the internal
battery.
･
To store the terminal, avoid the
following conditions so as not to
degrade the performance or the battery
life of the internal battery.
- The battery is fully charged (immediately after
the charging is complete)
- The battery has run out (the terminal cannot
power on)