Getting Started
8
Step 3: Hookups (continued)
Make the following connections if your TV doesn’t have A/V inputs.
A
Use this hookup if you’re using:
• VHF/UHF antenna (you get channels 2–13 and channels 14 and higher)
• UHF-only antenna (you get channels 14 and higher)
• Separate VHF and UHF antennas
Antenna hookup
VHF/UHF
Match the type of
connector on your
TV: A, B, or C.
A
Rear of TV
B
VHF
C
UHF
VHF
This unit
UHF
B
Use this hookup if you’re using a VHF-only antenna (you get
channels 2–13 only)
A
Rear of TV
VHF/UHF Match the type of
connector on your
TV: A, B, or C.
B
For connector types
B and C, no UHF
connection is
required.
C
UHF
VHF
VHF
UHF
This unit
If you cannot connect your antenna cable to the unit directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external
antenna connector (not supplied) so you can connect the cable to the VHF/UHF IN
connector. If you have separate cables for VHF and UHF antennas, you should use a
U/V band mixer (not supplied). For details, see page 24.
or
or
or
or
Antenna cable (supplied)
Antenna cable (supplied)
IN
OUT
VHF/UHF
IN
OUT
VHF/UHF
