![Sony SLV-ED100ME Operating Instructions Manual Download Page 81](http://html.mh-extra.com/html/sony/slv-ed100me/slv-ed100me_operating-instructions-manual_397233081.webp)
81
Additional Information
Specifications
System
Channel coverage
VHF R1 to R12, E2 to E12, NZ1 to NZ11
UHF E21 to E69, R21 to R60
(471.25 – 863.25 MHz (C57))
CATV S01 to S05, S1 to S41
RF output signal
UHF channels 21 to 69
Aerial out
75-ohm asymmetrical aerial socket
Inputs and outputs
LINE-1 IN, LINE-2 IN and LINE-3 IN (SAT IN)
VIDEO IN, phono jack (1 each)
Input signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO IN, phono jack (2 each)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
LINE-1 OUT
VIDEO OUT, phono jack (1)
Output signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO OUT, phono jack (2)
Standard output: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
LINE-2 OUT (AUDIO)
AUDIO OUT, phono jack (2)
Standard output: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
PHONES
Stereo phono jack (1)
Standard output: 6 mW
Load impedance: 32 ohms
General
Power requirements
110 – 240 V AC, 50/60 Hz
Power consumption
22W
Operating temperature
5°C to 40°C
Storage temperature
–20°C to 60°C
Dimensions
Approx. 430
×
100
×
286 mm (w/h/d)
including projecting parts and controls
Mass
Approx. 4.7 kg
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Audio/video cable (3- phono to 3-phono) (1)
Plug adaptor (1) (SLV-ED100ME/ML only)
Design and specifications are subject to change
without notice.