manualshive.com logo in svg

Sony SLV-ED100ME, Operating Instructions Manual

Share
Download
Sony SLV-ED100ME Operating Instructions Manual Download Page 52

Basic Operations

52

To record satellite broadcasts

If you connect the satellite tuner and the VCR, you can record satellite
programmes.

1

Turn on the satellite tuner.

2

On the satellite tuner, select the satellite programme for which you
want to make a timer setting.

3

Follow the steps on pages 50 and 51.

4

Keep the satellite tuner turned on until the VCR finishes recording the
satellite programme for which you have made a timer setting.

Tips

• To cancel the procedure, press G-CODE before pressing OK.
• To record NTSC signals, set the tape speed to SP or EP.  To set the EP mode, display

“LP” in the tape speed position.

Notes

• The G-CODE system used in this VCR is for Singapore, Malaysia, Hong Kong,

Macao, etc. and cannot be used in areas such as U.S.A., Canada, Japan, Korea,
Taiwan, and U.K.

• If the VCR beeps repeatedly, this means that:

– The G-CODE number is incorrect.
– ONCE, DAILY, or WEEKLY was selected incorrectly. You cannot select DAILY or

WEEKLY for a programme that airs more than seven days ahead.

•

The TIMER REC indicator on the VCR flashes when you press 

I

/

u

 with no tape

inserted.

Recording TV programmes using the G-CODE system (continued)

Summary of Contents for SLV-ED100ME

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands