manualshive.com logo in svg

Sony SDX-1100V Series, User Manual

The Sony SDX-1100V Series User Manual is an essential guide to maximize your experience with this advanced product. Unlock its full potential by accessing the comprehensive manual available for free download from our website. Seamlessly navigate through features and functions with the help of this invaluable resource.

Share
Download
background image

12.APPENDIX E: Medium Auxiliary Memory Attribute 

 

SONY AIT-5 drive SDX-1100V series Ver.1.0                                              12-11 

Note: 

It is intended that this field provide a unique vendor identification of the vendor who wrote the Host Common 

attributes. In the absence of a formal registration procedure, T10 maintains a list of vendor identification codes in 
use. Vendors are requested to voluntarily submit their identification codes to T10 to prevent duplication of codes. 
 

0801h APPLICATION NAME:

 This attribute value contains the name of the application client. 

 

0802h APPLICATION VERSION:

 This attribute value contains the version of the application client. 

 

0803h USER MEDIUM TEXT LABEL:

 This attribute value is the user level identifier for the medium. 

 

0804h DATE & TIME LAST WRITTEN: 

This attribute value contains when the application client last wrote to the 

MAM. The format for the string is YYYYMMDDHHMM using a 24-hour time format 

Note: 

The application must update the “Date and Time Last Written” field any time the host attributes contents are 

modified. 
 

0805h TEXT LOCALISATION IDENTIFIER: 

This attribute value defines the character set used for attributes with a 

text format (Table 12-13). 
 

Table 12-13: TEXT LOCALISATION IDENTIFIER 

Value Meaning 

00h 

No code specified (ASCII) 

01h 

ISO/IEC 8859-1 (Europe, Latin America) 

02h 

ISO/IEC 8859-2 (Eastern Europe) 

03h 

ISO/IEC 8859-3 (SE Europe/miscellaneous) 

04h ISO/IEC 

8859-4 

(Scandinavia/Baltic) 

05h ISO/IEC 

8859-5 

(Cyrillic) 

06h ISO/IEC 

8859-6 

(Arabic) 

07h ISO/IEC 

8859-7 

(Greek) 

08h ISO/IEC 

8859-8 

(Hebrew) 

09h 

ISO/IEC 8859-9 (Latin 5) 

0Ah 

ISO/IEC 8859-10 (Latin 6) 

0Bh – 7Fh 

Reserved 

80h 

ISO/IEC 10646 (UCS-2BE) 

81h 

ISO/IEC 10646–1 (UTF-8) 

82h – FFH 

Reserved 

 

0806h BARCODE:

 This attribute value is the contents of a barcode associated with the medium in the MAM. 

 

0807h OWNING HOST TEXTUAL NAME:

 This attribute value indicates the host from which that USER MEDIUM 

TEXT LABEL originates. 
 

0808h MEDIA POOL: 

This attribute value indicates the media pool to which this medium belongs. 

 

0809h PARTITION USER TEXT LABEL:

 This attribute value is a user level identifier for the partition specified by 

the PARTITION NUMBER field in the CDB. 
 

080Ah LOAD/UNLOAD AT PARTITION: 

This attribute value indicates whether the media can be loaded or 

unloaded at the Partition specified by the PARTITION NUMBER field in the CDB. If loads and unloads are enabled 
for the specified partition, the value of this parameter will be one. If loads/unloads are not enabled for the specified 
partition, the value of this parameter will be zero. All other attribute values are reserved. If LOAD/UNLOAD AT 
PARTITION is disabled, then loads and unloads are performed at the beginning of the media instead of at the 
specified partition. If this attribute is in the nonexistent state then the default action will be to load/unload at the 
beginning of media. This field is not supported. 

Summary of Contents for SDX-1100V Series

































































































































































































Reviews:

No comments

Related manuals for SDX-1100V Series

Olympus Camedia MAUSB-100 Quick Start Manual preview
Camedia MAUSB-100
Brand: Olympus Pages: 2
V-TAC VT-5139 Instruction Manual preview
VT-5139
Brand: V-TAC Pages: 28
Rocsecure ROCBIT 2 Instruction Manual preview
ROCBIT 2
Brand: Rocsecure Pages: 10
Sans Digital ES424X6+BHP Quick Installation Manual preview
ES424X6+BHP
Brand: Sans Digital Pages: 2
Icy Box IB-RD2253-U31 User Manual preview
IB-RD2253-U31
Brand: Icy Box Pages: 24
Panasonic JU-314 Service Manual preview
JU-314
Brand: Panasonic Pages: 33
Panasonic JU-253-T Service Manual preview
JU-253-T
Brand: Panasonic Pages: 48
Clarke CONTRACTOR CSB25B Assembly Instructions preview
CONTRACTOR CSB25B
Brand: Clarke Pages: 4
Infotrend EonStor DS B Series Hardware Manual preview
EonStor DS B Series
Brand: Infotrend Pages: 157
ASUSTOR AS-604RD/RS Quick Installation Manual preview
AS-604RD/RS
Brand: ASUSTOR Pages: 16
Marvin Test Solutions GX5280 User Manual preview
GX5280
Brand: Marvin Test Solutions Pages: 50
QNAP TS-410E User Manual preview
TS-410E
Brand: QNAP Pages: 49
Kimberley KRB04 Fitting Instructions preview
KRB04
Brand: Kimberley Pages: 2
Nexgrill 960-0009 Owner'S Manual preview
960-0009
Brand: Nexgrill Pages: 5
Kanguru ABSOLUTE ID VIRTUAL DEFENDER Quick Start Manual preview
ABSOLUTE ID VIRTUAL DEFENDER
Brand: Kanguru Pages: 2
SULO MGB 60 Operating Instructions Manual preview
MGB 60
Brand: SULO Pages: 7
Manitowoc D320 Instruction Sheet preview
D320
Brand: Manitowoc Pages: 2
Arrow AR108-A Owner'S Manual & Assembly Manual preview
AR108-A
Brand: Arrow Pages: 48

Brands by name

Popular brands

Load more brands