SCD-XA9000ES
18
3-9.
BASE UNIT (DVBU4C or DVBU4D)
DVBU4C: Except AEP (Silver type)
DVBU4D: AEP (Sivler type)
1
two claws
1
two claws
S002
S001
cover (CAM)
2
Up the SWITCH board in the
direction of arrow
A
.
Note: Take care not to break the shaft of
the switch (S001, S002) when raising
the SWITCH board.
A
C
B
4
limiter (L)
3
screw
(BVTT3
×
6)
5
screw
(BVTT3
×
6)
6
limiter (R)
7
Insert a taper driver into the cover (CAM),
and rotate in the arrow
B
direction to raise
the base unit (DVBU4C or DVBU4D) in the arrow
C
direction. (Chuck release state)
8
screw (PTPWH3
×
8)
0
roller (L)
9
Raising the stable lock (L/R) assy simultaneously
in the arrow
D
direction, remove the base unit
(DVBU4C or DVBU4D) from the chassis (outseat).
Note: The stable lock (L/R) assy will attempt to
return in the reverse direction of arrow
D
by a spring force. Therefore, take care not
to break the shaft of stable lock (L/R) assy
when removing the stable lock (L/R) assy
from the base unit (DVBU4C or DVBU4D).
stable lock (R) assy
stable lock (L) assy
chassis (outseat)
D
D
