Sony RM-PJM600, Service Manual

Page: 11 / 106

1-7
12
(GB)
1
Rear remote control detector
2
Ventilation holes (exhaust)
3
AC IN socket
Connects the supplied AC power cord.
4
Security lock
Connects to an optional security cable (Kensington’s).
The security lock corresponds to Kensington’s
MicroSaver Security System.
If you have any comment, contact
Kensington
2853 Campus Drive, San Mates, CA 94403
U.S.A.
Tel: 800-535-4242: extension 3348
Home page address: http://www.kensington.com/
5
75
Ω
termination switch (bottom)
Normally set to ON. Set it to OFF when the projector
is connected to a computer or a monitor.
6
Connector panel
For details, see page 14 (GB).
7
Lamp cover (bottom)
Rear/Right Side/Bottom
Location and Function of Controls
8
Adjuster button
9
Lens shutter dial
Turn the dial upward to open the lens shutter.
0
Right speaker
!¡
Ventilation holes (intake)/air filter cover
Notes
• Do not place anything near the ventilation holes as it
may cause internal heat build-up.
• Do not place your hand or objects near the ventilation
holes — the air coming out is hot.
1
3
4 6 7 5
8
9
0
!¡
2
13
(GB)
Adjuster button
How to use the adjuster
To adjust height
While lifting the projector, adjust the height so that the
projector becomes level.
Press the adjuster button while lifting the projector to
adjust the height.
To stand the projector firmly
The adjuster can be extended outwards to support the
projector firmly.
Notes
• Be careful not to let the projector down on your
fingers.
• Do not push hard on the top of the projector with the
adjusters out.
• If the adjuster is not stretched out toward right and
left sides of the projector, the unit may be
overbalanced.