Sony RM-PJM600, Service Manual

Page: 10 / 106

1-6
10
(GB)
Control panel
Location and Function of Controls
1
I / u (on / standby) key
Turns on and off the projector when the projector is in
the standby mode. The ON/STANDBY indicator lights
in green when the power is turned on.
When turning off the power, press the
I / u
key
twice following the message on the screen, or press
and hold the key for about one second.
For details on steps for turning off the power, see “To turn off
the power” on page 24 (GB).
2
Indicators
ON/STANDBY: Lights up or flashes under the
following conditions:
• Lights in red when the AC power cord is
plugged into the wall outlet. Once in the standby
mode, you can turn on the projector with the
I / u
key on the Remote Commander or on the
control panel.
• Lights in green when the power is turned on.
• Flashes in green while the cooling fan runs after
turning off the power with the I /
u
key. The fan
runs for about 90 seconds after turning off the
power.
The ON/STANDBY indicator flashes quickly
for the first 30 seconds.
During this time, you cannot turn the power
back on with the
I / u
key.
POWER SAVING: Lights up when the projector is
in the power saving mode. When POWER
SAVING in the SET SETTING menu is set to
ON, the projector goes into the power saving
mode if no signal is input for 10 minutes.
Although the lamp goes out, the cooling fan keeps
running. In the power saving mode, any key does
not function for the first 30 seconds. The power
saving mode is canceled when a signal is input or
any key is pressed.
TEMP (Temperature)/FAN: Lights up or flashes
under the following conditions:
• Lights up when temperature inside the projector
becomes unusually high.
• Flashes when the fan is broken.
LAMP/COVER: Lights up or flashes under the
following conditions:
• Lights up when the lamp has reached the end of
its life or becomes a high temperature.
• Flashes when the lamp cover or air filter cover is
not secured firmly.
For details on the LAMP/COVER and the TEMP/FAN
indicators, see page 39 (GB).
3
INPUT key
Selects the input signal. Each time you press the key,
the input signal switches between video/audio input
and INPUT A connector.
MENU
ENTER RESET
INPUT
ON
/STANDBY
LIGHT
APA
VOLUME I / u
POWER
SAVING
TEMP
/FAN
LAMP
/COVER
5
2
6
7
8
0
9
1
4
3
11
(GB)
4
MENU key
Displays the on-screen menu. Press again to clear the
menu.
5
ENTER key
Enters the settings of items in the menu system.
6
RESET key
Resets the value of an item back to its factory preset
value. This key functions when the menu or a setting
item is displayed on the screen.
7
Arrow keys ( V / v / B / b )
Used to select the menu or to make various
adjustments.
8
APA (Auto Pixel Alignment) key
Adjusts a picture to be projected clearest automatically
while a signal from the computer is input.
9
/– keys
Adjust the volume of the built-in speakers and output
level of the AUDIO OUT jack.
+ :
Increases the volume.
– : Decreases the volume.
!º
LIGHT key
Lights the back lighting (orange) for the keys on the
control panel when the power is turned on. Press again
to turn off the back lighting.