Sony RM-PJM600, Service Manual

Page: 15 / 106

1-11
20
(GB)
S VIDEO VIDEO
INPUT A MOUSE
AUDIO OUT
AUDIO IN
L-AUDIO-R
S VIDEO VIDEO
INPUT A MOUSE
AUDIO OUT
AUDIO IN
L-AUDIO-R
Right side
15k RGB/Component equipment
to RGB/component output
SMF-402 Signal Cable (not supplied)
3X phono jack
˜ HD D-sub
15-pin (male)
Connecting with a VCR/15k RGB/Component Equipment
This section describes how to connect the projector with a VCR, external
active speakers, and 15k RGB/component equipment.
For details on how to connect a computer, see page 18 (GB).
Also refer to the instruction manuals of the equipment to be connected.
When making connections, be sure to:
• turn off all equipment before making any connections.
• use the proper cables for each connection.
• insert the plugs of the cables properly; plugs that are not fully inserted
often generate noise. When pulling out a cable, be sure to pull it out from
the plug, not the cable itself.
S-Video cable
(not supplied)
Audio/video cable
(supplied)
Active speakers
to audio/video outputs 1)
to S video
output
1)
VCR
Right side
Connecting
1) When both the S VIDEO and VIDEO jacks are connected to the external equipment, the input signal from the S VIDEO jack is selected.
Stereo audio
connecting cable
(not supplied)
21
(GB)
Notes
• Set the aspect ratio using ASPECT in the INPUT SETTING menu
according to the input signal.
• When you connect the unit to 15k RGB/component video equipment,
select RGB or component with the INPUT-A setting in the SET
SETTING menu.
• Use the composite sync signal when you input the external sync signal
from 15k RGB/component equipment.