20
Important EMC notices for use in the medical environments
• The PMW-10MD needs special precautions regarding EMC and needs to be installed and put
into service according to the EMC information provided in the instructions for use.
• The portable and mobile RF communications equipment such as cellular phones can affect the
PMW-10MD.
Warning
The use of accessories and cables other than those specified, with the exception of replacement
parts sold by Sony Corporation, may result in increased emissions or decreased immunity of the
PMW-10MD.
Warning
If the PMW-10MD should be used adjacent to or stacked with other equipment, it should be
observed to verify normal operation in the configuration in which it will be used.
Guidance and manufacturer’s declaration - electromagnetic emissions
The PMW-10MD is intended for use in the electromagnetic environment specified below.
The customer or the user of the PMW-10MD should assure that it is used in such an environment.
Emission test
Compliance
Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
The PMW-10MD uses RF energy only for
its internal function. Therefore, its RF
emissions are very low and are not likely
to cause any interference in nearby
electronic equipment.
RF emissions
CISPR 11
Class B
The PMW-10MD is suitable for use in all
establishments, including domestic
establishments and those directly
connected to the public low-voltage
power supply network that supplies
buildings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class B
Voltage fluctuations/flicker
emissions
IEC 61000-3-3
Complies
Summary of Contents for PMW10MD
Page 163: ......
