Sony PMW10MD, Instructions Before Use

Page: 29 / 163

Specifications 29
Format
3-chip RGB
Optical system
F2.2 or more (prism system)
Lens mount
C-mount
Sensitivity
F10 (Typical) (with 1080/60i, 89.9%
reflection, 2000 lx)
Minimum illumination
0.14 lx (F2.2, +21 dB, 64-frame
accumulation)
Video S/N
54 dB (Y) (Typical)
Horizontal resolution
1000TV lines or more (with HD SDI,
HQ 1080 output)
Modulation
45% (27.5 MHz)
Black level
3±1% (when “Black” in the Picture
Profile menu is set to ±0)
Registration
0.02%
Gain 0 dB to 21 dB, AGC
Shutter speed
1
/
60
to
1
/
16000
sec (when “Country” is
set to “PAL”) or
1
/
20000
sec (when
“Country” is set to “NTSC”).
Slow shutter
2 to 8 frames
EX Slow Shutter: 16, 32, 64 frames
Camera cable connector
20-pin, round
Sampling frequency
48 kHz
Quantization
16 bits
Headroom
20 dB
Frequency response
150 Hz to15 kHz (within ±3 dB)
Distortion
0.1% or less (with input level –40 dBu)
Card slot type
ExpressCard/34
Number of slots
2
Connector
Conforming to PCMCIA ExpressCard
Recording rate
50 Mbps or more
Loading rate
50 Mbps or more
Input connectors
MIC Stereo mini jack
Format: Supports stereo/monaural
electret condenser microphones
Power: Supports both plug-in power
types and battery/plug-in power types
Rated sensitivity: –58 dB (0 dB = 1 V/
Pa, 1 kHz)
Rated impedance: 2 k
Ω
to 3 k
Ω
EXT SYNC IN
BNC
Output connectors
VIDEO OUT
BNC, 1.0 Vp-p, 75
Ω
, unbalanced
S-VIDEO OUT
mini-DIN 4-pin
Y: 1.0 Vp-p, 75
Ω
, unbalanced, sync
negative
Audio block
Media
Inputs/outputs (camera control
unit)