3-3.
Self-Diagnosis
3-3-1.
Self-Diagnostic Items
Self Diag of the INFORMATION menu enables the user to execute self-diagnosis of the unit. After self-diagnosis is
executed, the result of self-diagnosis appears regardless of whether the result is good or bad.
The following two types of self-diagnosis (Diag Type) are provided.
Diag Type
Description
Type1 (Simple self-diagnosis)
Use this type to execute a simple version of self-diagnosis. This finishes in a short time.
Type2 (Complete self-diagnosis)
This type executes all registered self-diagnostic items. Since this type involves a mem-
ory test and complicated device tests, it takes time to be completed.
The following table lists self-diagnostic items.
Item No.
Self-diagnostic item
Description
Item1
Image processor block
Diagnosis of lens, CMOS block, and camera block.
Item2
Display block
Diagnosis of video signal system. (LCD and base-
band signal processing. )
Item3
Media block
Diagnosis of media recording and playback sys-
tem. (encoder, decoder, memory card, i.LINK, and
USB interface.)
Item4
Audio block
Diagnosis of audio input/output system.
Item5
System controller block
Diagnosis of system controller system.
Item6
Power block
Diagnosis of power supply system.
Item7
Interface between image processor block and dis-
play block
Diagnosis of the signal line from the camera signal
processor IC to the baseband processing IC inter-
face.
Item8
This item is not selectable.(Display only)
Item9
Video interface between display block and media
block during playback
Diagnosis of the video signal line (playback direc-
tion) from the AVIT signal processing IC through
the decoder IC to the baseband processing IC.
Item10
This item is not selectable.(Display only)
Item11
Item12
Item13
3-3-2.
Executing Self-Diagnosis
Preparation
The self-diagnosis can be executed only under the following conditions. When executing the self-diagnosis, change the
conditions to the following conditions with the SHUTTER switch and the SETUP menu.
Item
Menu
Submenu
Setting for self-diagnosis
SHUTTER switch
—
—
Off
CAMERA SET menu
SLS/EX SLS
—
Off
P.Cache Rec
Setting
Off
OTHERS menu
System
Country
NTSC Area
UDF/FAT
UDF
HD/SD
HD
Format
HD422 50/1080/59.94i
PMW-200/PMW-EX280
3-5
Summary of Contents for PMW-200
