13
Saving the stored operation in the
MEMORY CARD
Press R2 button while holding down
✕
button.
A mark appears on the upper right of the
screen.
Note
You can store only one custom setting of SoundScope
operation. If the data already exists, it is erased.
Loading the data in the MEMORY CARD
Press L2 button while holding down
✕
button.
A mark appears on the upper left of the
screen. To use the loaded data, follow the
procedure above.
Changing the size of the picture
Press the directional buttons (up or down)
while holding down
✕
button.
Changing and Storing the settings
1
....
During playback, press R1 button
while holding down
✕
button.
A mark flashes on the lower right of
the screen.
2
....
Operate the controller.
While the mark is lit, any changes you
make to the SoundScope operation
with the controller are stored.
3
....
When you are finished, press R1
button while holding down
✕
button.
The mark disappears and the
procedure is cancelled.
Note
Do not unplug the controller during these
procedures.
Switching to stored settings
1
... During playback, press L1 button
while holding down
✕
button.
A mark appears on the lower left of the
screen, and the SoundScope picture is
transformed by the stored operation.
2
... Press L1 button while holding down
✕
button.
The mark disappears and the
procedure is cancelled.
Tip
Your stored setting is lost when you turn off the
“PlayStation”. If you want to keep the data, you can
save and load it using a MEMORY CARD with one
memory block.
C
Additional operations
For the CD operation screen
• To move the mouse p): Move the
Mouse.
• To select the items: Press the left button.
B
Operation with the
Mouse
You can also operate SoundScope using the
Mouse (SCPH-1090: sold separately). Refer
to
A
for the operation.
A
!£
A
8
A
!£
A
!¡
A
9
A
6
