Using PC Cards
This computer has a card bus PC card slot that supports a Type I or II PC card.
To insert a PC card
You do not need to shut down your computer when inserting a PC card.
1.
Open the front panel.
2.
Insert the PC card into the PC card slot until it clicks into position.
When the card is completely inserted, the eject button pops out. If you cannot insert the card, do not
forcibly insert it. In this case, make sure the card is not inserted upside-down or backward, and then reinsert the
card into the slot carefully.
See the manual that came with the PC card for details on using it.
To close the front panel when the eject button is protruding, fold the button down onto the computer.
To eject a PC card
If you eject the PC card incorrectly, the system may not work correctly.
1.
Click the Start button on the Windows
®
taskbar, click Settings, and then click Control Panel.
2.
Click the PC Card icon.
3.
Click the name of the card that you want to eject, and then click Stop.
4.
When the message "You may safely remove this device" appears, click OK.
5.
Push the PC card eject button on the front panel of the system unit. You may need to pull out the
eject button before you can eject the card.
Page 156
