
Chapter 1 Preparation
9
Chapter 1
Chapter
1
Preparation
Features
The PCS-6000/6000P Multimedia Terminal can connect a remote party via
an ISDN (Integrated Services Digital Network) line
1)
. It sends and receives
images and sound, allowing you to have virtual face-to-face meetings with
people in other cities or countries.
The system accommodates up to three participants in one location.
However, you can add the optional PCS-A300 Microphones for additional
participants.
You can hold a point to multi-point meeting among six terminals when
using the 1B-channel or 2B-channel connection at each terminal, or among
four terminals when using the 8B-channel connection at each terminal.
You can install an optional interface board for connection with V.35
interface or RS-449 interface. And if you upgrade the Multimedia
Terminal using the PCS-UC601 Upgrade Kit, you can connect a remote
party via a LAN.
In addition, you can connect up to a maximum of six terminals via a LAN,
using the unit as an MCU (Multipoint Control Unit).
1) The optional board is required for connecting with an ISDN line. Up to
three PCS-I600 BRI Boards or single PCS-I601 PRI Board can be
installed into the Multimedia Terminal. However, when installing both
the BRI Board and PRI Board, two BRI Boards and single PRI Board
can be installed at the same time.
International standards
The PCS-6000/6000P Multimedia Terminal complies with ITU-T
Recommendations, for easy connection with remote parties overseas.
(ITU-T Recommendations have been defined by WTSC.)
WTSC: World Telecommunications Standardization Committee
ITU: International Telecommunication Union