108
Chapter 4 Advanced Operation
Chapter 4
To broadcast a picture of your terminal to
all the terminals
Select Self Broadcast from Broadcast Mode with the
joystick on the Remote Commander, then press the
joystick.
A picture on your monitor is broadcast to all the
terminals.
The indication appears on the monitor screen when
you broadcast.
To end the chair control
Press the FAR/NEAR button on the Remote
Commander.
Select Chair Release from Broadcast Mode with the
joystick on the Remote Commander, then press the
joystick.
Note
In point to multi-point meeting, the following
functions do not work:
– Far remote camera control
– Switching the input of the remote terminal
The system can connect to a normal phone to hold a
meeting using the sound only.
(Voice Meeting)
The basic procedure is same as one with images and
sound.
Note
• When you have upgraded the system using the
optional PCS-UC601 Upgrade Kit and using a LAN,
you cannot do the voice meeting.
• Voice-only teleconferences cannot be held using PRI-
rate ISDN lines.
To start a voice meeting with unregistered
remote parties
Set Line I/F to Telephone in the Manual Dial menu.
For details on the setting, see “Calling an Unregistered
Remote Party” on page 55.
The indication “Voice Only” appears on the monitor
screen, and the local picture is displayed on the local
monitor screen.
To register remote parties for holding a
voice meeting
Set Line I/F to Telephone in the List Edit menu.
For details on the registration, see “Registering a Remote
Party” on page 61.
To set the audio protocol
Set up the Telephone item in the Dial Setup menu.
When you call, set Telephone to Auto. This
automatically sets to G.711
µ
-law (NTSC); to G.711
A-law (PAL).
When the voice meeting starts from the remote
terminal, the audio protocol setting is not required.
For details on the setup, see “Dial Setup Menu” on page 32.
Voice Meeting
Connecting With an MCU