Sony PCM-7040, Operation Manual

Page: 72 / 91

Chapter 7
Chapter 7 Menu Operations
7-13
oFF*
(Continued)
The display that
appears and the
meaning of the
display
Data Functions
The display that
appears and the
meaning of the
display
Data Functions
Selects the hold mode of the
MUTE and PB CONDITION
indicators.
: does not hold the indicators’
lit status
oFF*
on
E-Hold (ERROR HOLD)
: holds the indicators’ lit
status
(However, the unit doesn’t
hold when the PB
CONDITION indicator lit
status is set to “corr”.)
E-trSHLd (ERROR
THRESHOLD)
Selects to carry out muting
when error rate increases.
: performs muting
nor*
: does not perform muting HiGH
Selects to open the editor
menu in the setup menu.
: close
[SEt Ed] (SETUP EDIT
MENU)
: open
diSAbLE
: continues jog looping
without stopping at the end
EnAbLE
oPEn
cLoSE*
Selects to carry out audio
looping at memory jog.
: stops jog at either end of
the sound in memory
JoG LooP (JOG
LOOPING)
StArt (MEMORY
MODE)
Selects to use the sound
memory start or to find the
precise start point by
memory jog.
: for memory start
: for memory jog (The mark
position is at the end of the
memory.)
: for memory jog (The mark
position is in the middle of
the memory.)
Selects the memory jog
control mode.
: for all editors which can
control memory jog
Edit-E
Edit-c
JoG ctL (MEMORY
JOG CONTROL)
: for an editor which cannot
control memory jog
(performs memory jog
control when you press the
GO TO key.)
: for an editor which cannot
control memory jog
(performs memory jog
control when you press the
JOG key during playback.)
on-1
on-2
StArt
: first edit is performed when
a blank tape is used
on
1St Edit (FIRST EDIT)
oFF*
Activates the BVE video
editor to perform the first edit.
: first edit is not performed
Selects to send back TIME
CODE MISSING upon
receiving the CURRENT
TIME SENSE command.
: does not send back
the message (BVE-800)
: sends back the message on
tc rtn (TIME CODE
MISSING RETURN)
oFF*
EDIT STATUS bit return
mode when editing
: returns 1 even when the
recording is not carried out.
: returns 1 only when the
recording is carried out.
on*
oFF
Edit rtn (EDIT
RETURN)
: open oPEn
cLoSE*
Selects to open the menu of
the RS-232C in the setup
menu.
: close
Selects the baud rate.
: 1200 bps
: 9600 bps
bAud rAtE (BAUD
RATE)
1200
2400
4800
9600*
: 2400 bps
[SET rS] (SETUP RS-
232C MENU)
: 4800 bps
Selects the parity bit.
: no
: an odd number
PAritY (PARITY BIT)
nonE*
odd
: an even number En
: 7 bits
dAtA (DATA BITS)
Selects the data bits.
: 8 bits
7
8*