Sony PCM-7040, Operation Manual

Page: 63 / 91

Chapter 7
7-4
Chapter 7 Menu Operations
7-2 DISPLAY Key Menu Operations
7-2-3 DISPLAY Key Menu List
DISPLAY key
menu Functions
LOCATE POINT Sets the time code of the locate point
for the time code locate operation.
Sets the Program number for the locate
point or search for the End ID.
Sets the program number to be
recorded simultaneously with a start ID.
Displays the tape running timer
(elapsed time). You can reset this value
using the RESET key.
Displays the user bit read from the tape
during playback.
Displays the external time code input to
the unit.
Displays the user bit of the external
time code input to the unit.
Displays the internal generator time
code.
Displays the user bit of the internal
generator time code.
Sets the start time value of the internal
time code generator.
Sets the contents of the user bit of the
internal time code generator.
Sets the tape speed for variable-speed
playback, and displays the set data.
Sets the offset value for chase
synchronized operation, and displays
the set data.
Renumbers the Program numbers into
order, or numbers a Start ID which was
not recorded with a Program number.
Displays the cue speed when the unit is
in cue mode.
LOCATE POINT
(Program number)
PNO
ELAPSE
U-BIT
EXT TIME CODE
GEN TIME CODE
GEN U-BIT
GEN SET TIME
GEN SET U-BIT
VARI SPEED
CHASE OFFSET
rEno
(RENUMBER)
CUE SPEED
EXT U-BIT
7-2-1 DISPLAY Key Menu
Operations
There are the following three methods to change the
display.
• Press the DISPLAY menu key on the front panel
• Turning the search dial while holding down the
DISPLAY menu key.
• Press the FF/REW keys while holding down the
DISPLAY menu key.
7-2-2 DISPLAY Key Menu
LOCATE POINT
LOCATE POINT (Program number)
PNO
ELAPSE
U-BIT
EXT TIME CODE
EXT U-BIT
GEN TIME CODE
GEN U-BIT
GEN SET TIME
GEN SET U-BIT
VARI SPEED
CHASE OFFSET
CUE SPEED
rEno (RENUMBER)