Sony PCM-7040, Operation Manual

Page: 69 / 91

Chapter 7
7-10
Chapter 7 Menu Operations
7-3 Dial Menu Operations
(Continued)
Selects the blank time for
automatically writing the Start
ID.
: 1 sec.
: 1.5 sec.
:
: 3 sec.
:
: 7.5 sec.
1_0
1_5
:
3_0*
:
7_5
L SYnc bt (LEVEL
SYNC BLANK TIME)
: locates the next start ID
oFF*
on-n
Auto StoP (AUTO
STOP)
: locates the previous start ID on-P
Selects the locating mode
when you load a cassette.
: does not locate
: locates the first start ID after
rewinding the tape to the
tape top
Selects to preroll stop before
the point where an ID is
written at atart ID locating or
program-number locating.
: does not preroll
oFF*
on
Auto SrcH (AUTO ID
SEARCH)
PrEroLL (PREROLL)
oFF*
: prerolls
Selects the tape speed for
renumbering
: 80 times speed
on
nor*
rEno SPd (RENUMBER
SPEED)
SLo : 16 times speed
Selects the mode when the
unit reads the skip ID.
: does not locate
[SEt SYS] (SETUP
SYSTEM MENU)
Selects to open the setup
menu of the system.
: close
cLoSE*
: open oPEn
Selects the copy ID.
: records the copy ID
(00) of which the unit
permits to copy
: records the copy ID (11) for
the pre-recorded tape
PEr*
inH
PrErEc
coPY id (COPY ID)
: records the copy ID
(10) of which the unit
inhibits to copy
: does not match both phase
EnAbLE*
diSAbLE
SYncPb (SYNC PB)
Selects to synchronize the
playback time code with the
phase of the input video sync
signal.
: matches the phase
Selects to stop with roll back
when the tape stops in the
assemble recording mode.
: stops with rollback
rLb StoP (ROLLBACK
STOP)
on*
: does not stop with rollback oFF
In an editing system
consisting of a player,
recorder, and RM-D7300
Digital Audio Editor, selects
the equipment to be chased.
: the player (when the player
is PCM-7030/40/50)
: the recorder (when the
player is not PCM-7030/40/
50)
Selects the mode when this
unit receives the rechase
command from 9-pin remote
connector.
: ON-1
: ON-2
oFF*
on
on-1*
Ed cHASE (EDIT
CHASE)
9P rEcHS (9 PIN
RECHASE MODE)
on-2
on
iS dFLt (POWER ON
MEMORY START
MODE)
oFF*
Activates the memory start
when power-on.
: OFF
: ON
Selects the delay time to
output the sound after
pressing the PLAY key for
the memory start playback.
: 0 msec
: 50 msec
: 100 msec
: 200 msec
:
: 500 msec
Selects to accept control
from the keys on the front
panel, and parallel remote
control signals via the 37-pin
or 8-pin connector in remote
mode.
: does not accept commands
0*
50
100
200
:
500
diSAbLE
iS dLy-t (MEMORY
START DELAY)
LocAL (LOCAL
ENABLE)
: accepts commands EnAbLE
PLAy*
PLAyStoP
r-8Pin (8 PIN REMOTE
MODE)
Selects the play/stop mode
of 8-pin remote.
: play and stop mode are
independent on each other.
: enters PLAY mode at 1-pin
fall time and STOP mode
at 1-pin rise time.
The display that
appears and the
meaning of the
display
Data Functions
The display that
appears and the
meaning of the
display
Data Functions