manualshive.com logo in svg

Sony PCM-7040, Operation Manual

Share
Download
Sony PCM-7040 Operation Manual Download Page 15

Chapter 2

2-8

Chapter 2

Location and Function of Parts and Controls

4

 Lock range indicator

Indicates “WIDE” when the wide range is selected for
external synchronization.  (You do this by setting the
setup menu “SYNC NARROW” to “OFF”.)  The
factory setting of “SYNC NARROW” is “ON”.

See section 7-3 “Dial Menu Operations” (page 7-5).

5

 DISPLAY key menu display area

Every time you press the DISPLAY key on the front
panel, the DISPLAY key menu in the input/set data
display area changes.  The menus displayed and their
functions are as follows:

See section 7-2 “DISPLAY Key Menu Operations” (page 7-
4) for more detailed information.

LOCATE POINT: This menu shows a locate point

time code data.

LOCATE POINT (Program number): This menu

shows the current Program number and the locate
point Program number.

Pno: This menu shows a program number to be

recorded with the start ID in assemble recording
mode.

ELAPSE: This menu shows the tape running time.
U-BIT: This menu shows the user bit data read from

the tape.

EXT TIME CODE: This menu shows the external

time code being input.

EXT U-BIT: This menu shows the external user bit

data being input.

GEN TIME CODE: This menu shows the time code

generated by the built-in time code generator.

GEN U-BIT: This menu shows the user bit data

generated by the built-in time code generator.

GEN SET TIME: This menu shows the initial value

of the time code to be generated by the built-in
time code generator.

GEN SET U-BIT: This menu shows the user bit data

to be generated by the built-in time code
generator.

VARI SPEED: This menu shows the tape speed for

variable-speed playback (VARI-SPEED mode).

CHASE OFFSET: This menu shows the chase offset

time.

rEno: This menu shows the initial value of the

Program number when the unit is renumbering the
Program numbers.

SHtL/JoG: This menu shows the cue speed when the

unit is in cue mode.

6

 Generator mode indicator

Displays “FREE FUN” when the generator mode is set

to FREE RUN.   (You do this by setting the setup
menu “FREE RUN” to “ON”.)  The factory setting of
“FREE RUN” is “OFF” (REC RUN).

See section 7-3 “Dial Menu Operations” (page 7-5).

7

 Emphasis indicator

Displays “EMPH” while de-emphasis circuitry is

being activated.

8

 Time code mode indicator

When the SMPTE time code is used, this indicator

displays “NDF” (for non-drop frame mode) or “DF”
(for drop frame mode) depending on the mode of time
code used.  You can change the setting using a setup
menu.

See section 7-3 “Dial Menu Operations” (page 7-5).

2-2  Display

Summary of Contents for PCM-7040




























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands