Sony PCG-VX88 VAIO User Guide (primary manual) User Manual Download Page 29

Page: 29 / 184

Hibernate mode

In the Hibernate mode, the state of the system is saved on the hard disk drive and power is turned off. The power indicator
is off in this mode.

To activate Hibernate mode

Press the key combination Fn+F12, or press the power button and release it immediately. The "Preparing to
Hibernate" screen appears, and the computer enters Hibernate mode.

Do not move the computer until its power indicator turns off.

Press the power button to return to normal mode.

Page 29

Summary of Contents for PCG-VX88 VAIO User Guide (primary manual)

























































































































































































Search results

Summary of Contents for PCG-VX88 VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-VX88 VAIO User Guide (primary manual)

Brands by name

Popular brands

Sony PCG-VX88 VAIO User Guide (primary manual), User Manual

Search results

Summary of Contents for PCG-VX88 VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-VX88 VAIO User Guide (primary manual)

Brands by name

Popular brands