Sony PCG-VX88 VAIO User Guide (primary manual) User Manual Download Page 108

Page: 108 / 184

Confirming Added Memory Capacity

Turn on the computer.

Click Start on the Windows

taskbar, point to All Programs, and then click Sony Notebook Setup.

Click the About This Computer tab. Verify that the System Memory displayed in the left panel matches the
amount of memory installed. (The displayed memory may be less than the installed memory due to the amount
used by the display adapter.)

Sony Notebook Setup Dialog Box

Page 108

Summary of Contents for PCG-VX88 VAIO User Guide (primary manual)

























































































































































































Search results

Summary of Contents for PCG-VX88 VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-VX88 VAIO User Guide (primary manual)

Brands by name

Popular brands

Sony PCG-VX88 VAIO User Guide (primary manual), User Manual

Search results

Summary of Contents for PCG-VX88 VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-VX88 VAIO User Guide (primary manual)

Brands by name

Popular brands