Sony PCG-GRX690K User Manual Download Page 97

Page: 97 / 264

Removing the port replicator

To remove the port replicator

Close any active programs to prevent data loss.

Double-click the

Unplug or Eject Hardware

icon

on the taskbar. The

Unplug or Eject Hardware

window

appears.

Select the floppy disk drive

in the Hardware devices window, if it is not already selected

Click

Stop

. The

Stop a Hardware device

window appears.

Make sure the appropriate device

is selected, and click

OK.

A message appears stating it is safe to remove the

hardware device.

Pull the release levers on each side of the port replicator to release the it from the computer.

Releasing the Port Replicator

Lift the computer away from the port replicator.

Rem ov ing the Port Replicator

Page 97

Summary of Contents for PCG-GRX690K









































































































































































































































































Search results

Summary of Contents for PCG-GRX690K

Reviews:

Related manuals for PCG-GRX690K

Brands by name

Popular brands

Sony PCG-GRX690K, User Manual

Search results

Summary of Contents for PCG-GRX690K

Reviews:

Related manuals for PCG-GRX690K

Brands by name

Popular brands