Sony PCG-GRX690K User Manual Download Page 5

Page: 5 / 264

Turning on the computer

To turn on the computer

Slide the OPEN switch to the right, and lift the cover while holding the bottom of the computer firmly.

Opening the Com puter

Press the power button until the power indicator turns on.

Turning on the Com puter

If you hold the power button down, the computer turns off.

If necessary, adjust the brightness controls for the computer screen (LCD) as follows:



To increase light intensity, press the

keys. Press the

Up Arrow

key

or the

Right Arrow

key



To decrease light intensity, press the

keys. Press the

Down Arrow

key

or the

Left Arrow

key

Page 5

Summary of Contents for PCG-GRX690K









































































































































































































































































Search results

Summary of Contents for PCG-GRX690K

Reviews:

Brands by name

Popular brands

Sony PCG-GRX690K, User Manual

Search results

Summary of Contents for PCG-GRX690K

Reviews:

Brands by name

Popular brands