GB
Cust
omizing y
our camc
or
der
TC/UB
(Items for setting up the time
code or user bit)
See “Using menus” (p. 58) on the operation.
The default settings are marked with
.
TC/UB Disp
You can toggle between the time code and
user bit displays.
TC
Displays the time code.
U-Bit
Displays the user bit.
TC Preset
You can preset the time code.
Select the 2 digits you want to set, then
set the value with
/
.
You can set the time code between 00:00:00:00
and 23:59:59:24.
Set other digits by repeating step
and
touch [OK].
To reset the time code
Select [Reset] on the [TC Preset] display or
press the TC RESET button on the Wireless
Remote Commander.
UB Preset
You can preset the user bit.
Select the 2 digits you want to set, then
set the value with
/
.
Set other digits by repeating step
and
touch [OK].
To reset the user bit
Select [Reset] on the [UB Preset] display.
TC Run
You can select how the time code advances.
Rec Run
Advances the time code only during
recording. Select this setting to record the
time code continuous from the last time code
of the previous recording.
Free Run
Advances the time code regardless of
operation of your camcorder.
Notes
Even if the time code advances in the [Rec
Run] mode, the time code may not be recorded
sequentially in the following cases.
When the recording format is changed.
When the recording media is removed.
TC Make
Preset
Records the newly set time code on the
recording media.
Regenerate
Reads the last time code of the previous
recording from the recording media and
records the new time code consecutively
from the last time code during the backspace
editing.
The time code runs in [Rec Run] mode
regardless of the setting of [TC Run].
