13
System Configuration Examples
Point-to-Multipoint Example
You can connect a single sender to multiple receivers. This allows you to display the same images on multiple monitors.
Multipoint-to-Multipoint Example (Video Transmission Group Configuration)
You can connect multiple senders to multiple receivers. By configuring video transmission groups, you can send
specified images to specified receivers. You can construct a network video transmission system for medical procedures
that consists of up to 4 senders and 16 receivers connected to the network at the same time via manual DIP switch
configuration.
Endoscopic
device
Optical network
switch
NU-IP40S
(sender)
SDI cable
Optical fiber cable
Video signal transmission
NU-IP40S
(receiver)
NU-IP40S
(receiver)
Same endoscopic images displayed
