Sony NSP-1, Service Manual

Page: 35 / 122

2-7 (E)
NSP-1
Gasket 4
x
7
MPU-137 board
Heat sink A
HDD bracket 2
B2 x 3
Heat conduction sheet
MPU-137 board
Installation
9. Attach a new gasket (4
x
7) to heat sink A on the
MPU-137 board.
.
Gasket 4
x
7: 4-677-317-01
10. Reinstall the MPU-137 board in the reverse order of
steps 6 to 8.
n
Make sure to connect the connector CN2 on the
flexible card board to the connector CN1901 on the
MPU-137 board.
11. Reassemble the unit in the reverse order of steps 1 to
5.
8. Remove the four screws, and remove HDD bracket 2
and the heat conduction sheet from the MPU-137
board.