Sony NSP-1, Service Manual

Page: 12 / 122

1-4 (E)
NSP-1
0
SERIAL: Pin 9 (male)
(External view)
Pin No. Signal Note
1 CD NC
2 RXD: Received Data (Input) Receive data
3 TXD: Transmitted Data (Output) Transmit data
4 DTR: Data Terminal Ready
(Output)
5 SG: Signal Ground Digital GND
6 DSR: Data Set Ready (Input)
7 RTS NC
8 CTS NC
9 RI NC
7
Network: RJ-45 modular jack
100BASE-TX/10BASE-T
(External view)
Pin No. Signal Note
1 TPOP Transmit data ( + )
2 TPON Transmit data ( _ )
3 TPIP Receive data ( + )
4 NC —
5 NC —
6 TPIN Receive data ( _ )
7 NC —
8 NC —
8
USB
n
This is a connector for extensions and not used.
9
ANALOG RGB OUT: Pin 15 (female)
(External view)
Pin No. Signal Note
1 RED R (red) signal
2 GREEN G (green) signal
3 BLUE B (blue) signal
4 NC —
5 GND GND
6 RED.GND GND for R (red) signal
7 GREEN.GND GND for G (green) signal
8 BLUE.GND GND for B (blue) signal
9 NC —
10 SYNC.GND GND for sync signal
11 NC —
12 SPD DATA
13 HSYNC Horizontal sync signal
14 VSYNC Vertical sync signal
15 SPCLK CLOCK
15 11
5 1
10 6
6 9
1 5