Sony NSP-1, Service Manual

Page: 14 / 122

1-6 (E)
NSP-1
S801
S802
1
2
3
4
A B C
D
DEC-158 board (A side)
1-5. Switch Settings on Boards
DEC-158 Board
Ref. No. Bit Name Description Factory setting
S801 — Reset button Restarts the unit. —
S802 1 IP address When the power of the unit is turned on while this switch OFF
display switch is on, IP address of the unit is displayed on devices
(color monitor, etc.) connected to the unit.
n
The operation process is temporarily suspended while the
IP address is displayed, but when this switch is turned off,
the unit will start operating normally.
2 — Not used OFF
3 IP address When the power of the unit is turned on while this switch OFF
initialize switch is on, the IP address of the unit is initialized to the factory
setting.
m
.
Factory setting
IP address:
192.168.0.1
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.254
. The operation process is temporarily suspended after
the initialization of the IP address is completed, but
when this switch is turned off, the unit will start operating
normally.
. If the wireless LAN has been activated, it will be
deactivated and Ethernet will be activated.
4 Service mode When the power of the unit is turned on while this switch OFF
selection switch is on, the service mode setting window is displayed on
devices (color monitor, etc.) connected to the unit.
n
Contact your local Sony Sales Office/Service Center for
the log in ID and password.