Sony MINIDISC ZS-M35 Service Manual Download Page 33

Page: 33 / 124

– 33 –

5-3. CD SECTION

Set the CD test mode when performing confirmations.
After completing the confirmation, release the CD test mode.

In the CD test mode, the set works as following sequence.

CD test mode sequence:

Note 1:

ALL SERVO ON mode 1 and TRACKING GAIN UP mode 1:

LPC ON (lights up “ALL” indication)

ALL SERVO ON mode 2 and TRACKING GAIN UP mode 2:

LPC OFF (Does not lights up “ALL” indication)

*) LPC: Laser power control

Note 2:

TRACKING GAIN UP mode 1, 2 is not used in servicing.

1. Entering the CD Test Mode

1. Press the

[OPERATE]

button to turn the power ON.

2. Open the disc lid, and put a disc.
3. Close the disc lid.
4. Press the

[OPERATE]

button to standby state.

5. Press the button

[EDIT]

[SOUND]

and

(CD) simulta-

neously.

6. After display “CD” for a few seconds, enter the CD test mode

(STOP mode 1), and display as below.

1. Enter the CD test mode

(STOP mode 1)

Press the

(CD)

button.

2. STOP mode 2

3. FOCUS mode

4. ALL SERVO

ON mode 2

5. TRACKING

GAIN UP mode 1

6. TRACKING

GAIN UP mode 2

7. ALL SERVO

ON mode1

Press the

(CD)

button.

Press the

[ , CD]

button.

Press the

[ , CD]

button.

Press the

[ , CD]

button.

Press the

[ , CD]

button.

Press the

[ , CD]

button.

Press the

[ , CD]

button.

Press the

(CD)

button.

Press the

(CD)

button.

Press the

(CD)

button.

Press the

(CD)

button.

Display

2. STOP Mode 2

1. Press the

(CD) button to enter the STOP mode 2, and dis-

play as below.

Display

2. Press the

and

button to move the optical pick-up to

position of the track where signal is recorded.

3. FOCUS Mode (Traverse Confirmation)

1. Press the

button to enter the FOCUS mode and display as

below. (Focus servo ON. CLV-S, tacking and sled servo OFF)

Display

2. Connect an oscilloscope to TP (TEO) and TP (VC) on the CD

board.

Connection:

XXX

3A0

3. Confirm that the traverse level of waveform satisfy specified

value as follows.

Traverse Waveform

+
–

CD board

TP (TEO)
TP (VC)

oscilloscope

(DC range)

Specified Value:
traverse level: 160 to 380 mVp-p

Connecting Location: CD board (See page 34)

traverse level:
160 to 380 mVp-p

A = B

Summary of Contents for MINIDISC ZS-M35





























































































































Search results

Summary of Contents for MINIDISC ZS-M35

Reviews:

Related manuals for MINIDISC ZS-M35

Brands by name

Popular brands

Sony MINIDISC ZS-M35, Service Manual

Search results

Summary of Contents for MINIDISC ZS-M35

Reviews:

Related manuals for MINIDISC ZS-M35

Brands by name

Popular brands